The spacers for lightweight timber formwork are made of drawn steel, with rounded edges. The spacers are not joined or cut, each with a tensile strength of over 70 kg / mm2.
The sizes of the spacers vary from 10 cm to 100 cm in length with a step of 5 cm, depending on the size of the wall to be poured.
Their use contributes to high productivity in construction and repair.
The spacers are "disposable", since after reinforcement and pouring the wall, they remain inside it.
The spacers are packaged in cardboard boxes of 100 pieces each.
Accessories for metal spacers:
• U-shaped profile L500mm
• U-shaped profile 60x1200mm;
• U-shaped profile 80x1200mm;
• Wedge for spacers.
| OPTIONS |
| Code |
Name |
Length (mm) |
Width (mm) |
Weight (kg) |
Price MDL |
Price MDL Packing 100 pcs. |
| 00000801 |
Metal spacers L 100 |
100 |
20 |
0,06 |
3.50 |
350 |
| 00000802 |
Metal spacers L 150 |
150 |
20 |
0,07 |
3.80 |
380 |
| 00000803 |
Metal spacers L 200 |
200 |
20 |
0,08 |
4.40 |
440 |
| 00000804 |
Metal spacers L 250 |
250 |
20 |
0,09 |
5.00 |
500 |
| 00000805 |
Metal spacers L 300 |
300 |
20 |
0,10 |
5.50 |
550 |
| 00002518 |
Metal spacers L 350 |
350 |
20 |
0,11 |
6.40 |
640 |
| 00000806 |
Metal spacers L 400 |
400 |
20 |
0,12 |
6.80 |
680 |
| 00000807 |
Metal spacers L 500 |
500 |
20 |
0,15 |
8.00 |
800 |
| 00002186 |
Metal spacers L 600 |
600 |
20 |
0,18 |
9.20 |
920 |
Material: rolled steel
Available sizes: from 100 to 1000 mm
Thickness: 2 mm
Tensile strength: 70 kg / mm2
Application: for reinforcing wooden formwork
Packaging - cardboard box 100 pcs.
METAL SPACERS FOR LIGHT WOODEN FORMWORK
- When constructing formwork, it is necessary to use spacers from the same manufacturer.
- Before pouring concrete, it is necessary to carefully check their correct connection with wedges and clamps.
- Do not use formwork of different lengths to ensure equal strength over the entire area.
- To install the correct number of spacers, it is necessary to follow the manufacturer's instructions to ensure high-quality concrete pouring.
- Concrete pouring should be slow, especially at the base of the formwork, the maximum vertical pouring speed should not exceed 2.5 m / h
