ELSA P25 Twin-Mast Work Platform (Lifting height up to 100 m, platform length up to 24.6 m)

The Electroelsa ELSA P25 twin-mast construction hoist platform, produced by the renowned Italian lifting equipment manufacturer Electroelsa, is a practical and efficient replacement for traditional lifting systems (such as suspended scaffolds).
The Electroelsa work platform can lift loads to a height of up to 100 m and has a high load capacity of up to 2.6 tons, which is why it is also referred to as a “heavy-duty lifting platform.”
This model is an improved version of the previous generation of lifting platforms known under the EP2818 series. The platform width can reach up to 24.6 meters.

Distinctive Features

Unlike competitors, Electroelsa never relies on a single gear shaft to support the hoist but instead distributes the drive system along the rack, ensuring far greater safety and stability.
For example, even the smallest-capacity hoist is supported by at least eight modules.
Electroelsa NEVER compromises on safety in this regard.

The technological design of Electroelsa hoists eliminates the risk of human error — a key cause of workplace accidents.
All hoists are equipped with an internal door interlock system, which can only be released when the cage is positioned at the landing with the gate open.

Electroelsa hoists never depend solely on one upper and one lower limit switch.
Instead, each hoist features three (3) limit switches installed at separate positions at both the top and bottom, enhancing operational safety.

For units designed to transport people, Electroelsa implements an even more reliable safety system.
Each hoist is fitted with two welded (not bolted) hooks positioned behind the parachute safety device and ahead of the motors.
This ensures that the cage cannot detach from the mast under any circumstances, even if all three limit switches fail.

All electrical panels and control panels on Electroelsa lifting equipment are rated IP66, while all motors are IP55, 50/60 Hz.