The Electroelsa ELSA PM-M20 material hoist — lifting height up to 220 m, load capacity up to approximately 2,300 kg.

Made to order

Order today andGet a discount

ELSA PM-M20 / EHM 2500

  • Maximum lifting height: 220 m

  • Maximum load capacity: 2300 kg

  • Platform size: 4.00 × 1.34 m

  • Power supply voltage: 400 V / 50 Hz

  • Motor power: 2 × 4 kW

  • Minimum required power: 12 kW

  • Lifting speed: 20 m/min

Brand: ELECTROELSA

The Electroelsa ELSA M20 is a powerful three-phase Italian material hoist capable of lifting up to 2300 kg.
This mast hoist combines high lifting performance with moderate energy consumption, allowing efficient transport of heavy loads.
Like all Electroelsa construction hoists, it offers an excellent balance between price and quality.


Technical Specifications

  • Lifting speed: 20 m/min

  • Maximum height with anchors: 220 m

  • Internal cabin dimensions: 2.28 × 1.34 m / 3.00 × 1.34 m / 4.00 × 1.34 m

  • Power supply voltage: 380/415 V, 50/60 Hz (three-phase)

  • Emergency switch: 32 A

  • Motor power: 2 × 4 kW (three-phase)

  • Starting current: 130 A

  • Minimum required power: 12 kW


Interchangeable With

EHM 2500/10 · EHM 2500/15 · EHM 2500/25 · EHM 2500/35 · EHP 1200 · EHP 1500


Distinctive Features

Unlike competitors, Electroelsa never relies on a single gear shaft for hoist support.
Instead, it distributes the drive system along the rack, providing superior safety and stability.
Even the smallest-capacity hoist is supported by at least eight modules
Electroelsa NEVER compromises on safety.

The technological design of Electroelsa hoists eliminates the risk of human error, a major cause of accidents.
All hoists are equipped with an internal door interlock system that can only be released when the cage is at floor level and the landing gate is open.

Electroelsa hoists are never limited to just one upper and one lower limit switch —
each unit uses three (3) limit switches, spaced apart both at the top and bottom for maximum operational reliability.

For equipment designed to carry people, Electroelsa installs an even more advanced safety system.
Each hoist is equipped with two welded (not bolted) hooks located behind the parachute safety device and before the motors.
This ensures that the cage cannot detach from the mast under any circumstance, even if all three limit switches fail.

All electrical panels and control units are rated IP66, while all motors are IP55, 50/60 Hz.
Each Electroelsa hoist includes manual unlocking from inside the cage, eliminating the need to climb onto the roof.


Optional Features

  • Cabin overload monitoring system

  • VFD inverter system for smooth speed control

  • Touchscreen monitor with automatic self-diagnostic system

  • PLC floor programming system with backup battery

  • Internal intercom system

  • Light and siren alarm system

  • Emergency lights for maintenance operations

  • Automatic lubrication pump

  • Protective roof

  • Digital password lock for authorized personnel access only

 
© LIDER Company. 1997–2025. All rights reserved.