The Electroelsa ELSA M50 is a powerful three-phase Italian material hoist with a rectangular (square) mast, also known as the EHM 2500/35, officially certified for use in Russia.
It can lift up to 3500 kg and is designed for heavy-duty applications.
This mast hoist features moderate energy consumption while allowing the lifting of extremely large loads.
Its spacious cabin can accommodate large mortar pumps, formwork panels, and other bulky materials.
Like all Electroelsa construction hoists, this high-capacity lift offers an excellent price-to-performance ratio.
Technical Specifications
-
Lifting speed: 20 m/min
-
Maximum height with anchors: 120 m
-
Internal cabin dimensions: 2.28 × 1.34 m
-
Power supply voltage: 380/415 V, 50/60 Hz (three-phase)
-
Emergency switch: 32 A
-
Motor power: 2 × 4 kW (three-phase)
-
Starting current: 130 A
-
Minimum required power: 12 kW
Interchangeable With
EHM 2500/10 · EHM 2500/15 · EHM 2500/25 · EHM 2500/35 · EHP 1200 · EHP 1500
Distinctive Features
Unlike competitors, Electroelsa never relies on a single gear shaft for hoist support.
Instead, the drive system is distributed along the rack, providing much greater safety and stability.
Even the smallest-capacity hoist is supported by at least eight modules —
Electroelsa NEVER compromises on safety.
The technological design of Electroelsa hoists eliminates the risk of human error, one of the leading causes of workplace accidents.
Every hoist is equipped with an internal door interlock system, which can only be released when the cage is positioned at the floor level and the landing gate is open.
Electroelsa hoists never rely solely on one upper and one lower limit switch.
Each model features three (3) limit switches, positioned separately at both the top and bottom, providing maximum reliability.
For models designed to transport personnel, Electroelsa uses an even more advanced safety system.
Each hoist is fitted with two welded (not bolted) hooks located behind the parachute safety mechanism and ahead of the motors.
This ensures the cage cannot detach from the mast under any circumstances, even if all three limit switches fail.
All electrical and control panels are rated IP66, and all motors are IP55, 50/60 Hz.
Each Electroelsa hoist is also equipped with manual unlocking from inside the cage, eliminating the need to climb onto the roof.
Optional Features
-
Cabin overload monitoring system
-
VFD inverter system for smoother control
-
Touchscreen monitor with automatic self-diagnostic system
-
PLC floor programming system with backup battery
-
Internal intercom system
-
Light and siren alarm system
-
Emergency lighting for maintenance operations
-
Automatic lubrication pump
-
Protective roof
-
Digital access lock (password-protected for authorized personnel only)
